Residential garages · Maple

Garage epoxy flooring in Maple

In most of Vaughan the finish you can have is decided by the slab you already own. Maple is the exception. Garage floors in the subdivisions off Rutherford and Major Mackenzie are usually flat, sound and free of the pitting that forces flake elsewhere, which puts solid colour and metallic genuinely on the table rather than on a list of things we would talk you out of.

The finish changes the look and a modest part of the cost. The preparation underneath it does not change at all.

Tell us about the garage.

The bay count and the finish you have in mind. We will tell you honestly whether your slab suits it.

A car count is enough.

Build year, anything currently on the floor, and the look you are after.

We reply by email. Read how requests are handled in our privacy notice.

Garage sequence

What our garage epoxy flooring process looks like in Maple

The decorative finishes are less forgiving than flake, so the order of work here front-loads the checks that decide whether you can have one.

  1. Flatness and light check

    Metallic and solid colour show every undulation the flake would have hidden, so the floor gets checked under raking light before either is quoted. Most Maple slabs pass. The ones that do not, we say so.

  2. Test patch on your own floor

    A sample board in a showroom is lit differently to your garage. The shortlisted finish goes down as a patch on your actual slab so the colour is judged in the light it will live in.

  3. Build specified around the finish

    Metallic needs a pigmented base and a clear coat with the movement built in. Solid colour needs a heavier film to stay uniform. The quote names the number of coats rather than leaving it to the day.

  4. Install and cure

    Grinding through topcoat in sequence, then the dates for walking on it, loading it and driving on it.

Metallic is the one finish where two identical garages come out looking different, because the pattern is created by how the material moves while it cures. That is the appeal, and it is also why nobody can show you an exact preview.

What we install here

Other Services We Provide in Maple

Garages are rarely the only concrete in a Maple house worth doing. Anything quoted on the same visit shares the setup, which is where the saving is.

Why us

Why choose us for garage epoxy flooring in Maple

Choosing a finish is the fun part and the part most likely to go wrong. Three things keep it honest.

  • A real choice

    Flat concrete opens the catalogue

    On a badly pitted slab, solid colour is a mistake regardless of budget, because a uniform surface puts every imperfection on display. Maple slabs are mostly flat enough that this stops being a constraint, so the finish becomes a decision about how you want the room to feel rather than damage control.

  • Grip, not repair

    The grind is about bond here

    Elsewhere grinding is chasing damage out of the slab. Here it exists purely to profile a hard surface so the primer can key in. That means the preparation is more predictable, and it also means it cannot be shortened just because the floor looks clean to start with.

  • Seen before committed

    A patch on your own slab

    Colour behaves differently under a garage door opening than under showroom lighting, and metallic in particular can read warmer or colder than the sample suggests. Putting the shortlisted finish on your floor first removes the one decision people most often regret.

Questions we actually get

Maple garage finish questions.

Can I really have a metallic floor in a garage?
Yes, and Maple slabs are the ones best suited to it. Two conditions apply. It needs an anti-slip additive in the clear coat, because a high-gloss metallic surface is genuinely slippery when a wet car drips on it. And it shows tyre marks more readily than flake, so it rewards a garage that gets swept.
Is solid colour a mistake?
It is on a damaged slab, and that is why it has a poor reputation. A uniform colour hides nothing, so every ripple, patch and old repair reads clearly. On a flat, sound Maple floor it looks like a finished room rather than a coated one. The honest test is the raking-light check, which we do before quoting it.
How much does the finish change the price?
Less than most people expect, because preparation is the same either way and preparation is the bulk of the labour. Metallic costs more in material and takes more skill to lay. Quartz costs more because there is more aggregate going down. Flake and solid colour sit close together. None of it changes the grinding.
We are turning the garage into a gym. Does that change the floor?
It changes the topcoat rather than the system. A gym floor takes point impact from dropped weights instead of rolling load from tyres, so the build gets a heavier clear coat, and rubber matting goes over the platform area rather than trying to make the coating survive a barbell. The rest of the floor stays a normal garage build.
Can you coat only part of the garage?
Technically yes, and it rarely looks the way people imagine. A coated area meets bare concrete at a visible hard line that collects dirt, and there is no way to feather it out. Where a boundary is genuinely wanted, a colour change within one continuous coated floor gives the same effect without the exposed edge.
Does the flake colour have to match anything?
Nothing structural depends on it. The practical advice is to pick against the door and the brick in daylight rather than against a screen, and to remember that the base colour beneath the flake has far more range than the flake blends do. Most people end up choosing the base first.

See the finish on your own floor first.

Send a photo from the door and the look you are after. We will confirm whether the slab carries it before anyone commits.

Request a written quote

Free written quoteVaughan & York Region

Get a quote